ViewCube stopped working in imos iX: what can I do?
Restart the ViewCube with NAVVCUBE OFF and ON. If it keeps failing, use the View toolbar and save it in a workspace of your own.
Short answer: Type NAVVCUBE in the command line, choose OFF, then type NAVVCUBE again and choose ON. That usually gets the ViewCube in imos iX working again. If it keeps misbehaving on your PC, show the AutoCAD View toolbar and save it in a workspace of your own. In Wood Intelligence implementations we often recommend this toolbar as a permanent replacement, because it is equally stable on every graphics card.
Applies to
- imos iX CAD, all versions based on AutoCAD OEM with a ViewCube
- Menu names from the English AutoCAD components: ViewCube Settings, Toolbars, AutoCAD OEM, View and Save Current As...
- No Ardis, ERP or CNC integration involved: this only concerns the display on the workstation
- Last checked: November 2026
1. Restart the ViewCube with NAVVCUBE
- Click in the command line at the bottom of the drawing area.
- Type
NAVVCUBEand press Enter. - Choose OFF. The ViewCube disappears.
- Type
NAVVCUBEagain and press Enter. - Choose ON.
- Click a face of the ViewCube, for example FRONT, and check that the view changes.
2. Review the ViewCube settings
- Right-click the ViewCube.
- Choose ViewCube Settings...
- Under On-screen position, check that the ViewCube sits where you can see it, for example Top Right.
- Clear Use view transitions when switching views. The view then switches instantly, without animation.
- If the settings are completely off, click Restore Defaults.
- Click OK.
3. Use the View toolbar as a permanent replacement
On some hardware the ViewCube stays unreliable, even after a restart. Use the classic AutoCAD view buttons instead.
- In imos iX, open the Support tab.
- Click Toolbars.
- Choose AutoCAD OEM.
- Choose View.
- Drag the toolbar to a spot where it is comfortable to use, for example next to the drawing.
The toolbar has buttons for the top, bottom, left, right, front and back views and for the four isometric views.
4. Save the toolbar in a workspace of your own
- At the bottom right of the status bar, click the gear icon (Workspace Switching).
- Choose Save Current As...
- In Name, enter a clear name, for example the name of the draughtsperson.
- Click Save.
- From now on, select your workspace from the same gear icon. The workspace with the check mark is active.
Tip: If several draughtspeople share one PC, give each of them a workspace of their own. Everyone keeps their own layout and picks the right one with a single click.
Why this approach?
The ViewCube is a graphics layer on top of the drawing. How stable it is depends on the graphics card and its driver. On some workstations it disappears, flickers or stops responding to clicks. You will find plenty of questions about this online, without a fix that works on all hardware.
NAVVCUBE OFF and ON rebuilds that layer. This usually clears a temporary glitch without restarting imos iX.
The buttons on the View toolbar call AutoCAD's standard view commands. They do not need the ViewCube's graphics layer, so they keep working where the ViewCube fails. Saving them in a workspace puts them back in the same place after every restart.
Common mistakes
- Typing NAVCUBE with one V. You will then see
Unknown command "NAVCUBE". Press F1 for help.The command isNAVVCUBE, with two Vs. - Not saving the toolbar in a workspace. After a restart or update the old layout comes back and the toolbar is gone.
- Never updating the graphics driver. An outdated driver is a common cause of a misbehaving ViewCube.
- Not checking the active workspace after an update. Use the gear icon to check that your own workspace still has the check mark.
Frequently asked questions
My ViewCube has disappeared completely. How do I get it back?
Type NAVVCUBE in the command line, press Enter and choose ON. If you still cannot see it, open ViewCube Settings via NAVVCUBE and Settings, and check the On-screen position.
I get "Unknown command NAVCUBE". What am I doing wrong?
The command is NAVVCUBE, with two Vs. Type it again and press Enter.
Can I switch the ViewCube off completely?
Yes. Type NAVVCUBE and choose OFF. Then switch views with the View toolbar, as described in steps 3 and 4 above.
Switching views with the ViewCube is slow. Can it be faster?
Yes. In ViewCube Settings, clear Use view transitions when switching views. The view then switches instantly. For more speed tips, read imos iX is slow: what can I check myself?
Further reading
- imos iX is slow: what can I check myself?
- What PC do I need for imos iX?
- How do I create automatic views and sections in imos iX and keep them up to date?
- Have our consultants review your imos iX workstations
More than one solution
Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.
imos is a trademark of imos AG. AutoCAD is a trademark of Autodesk, Inc. Wood Intelligence is an independent consultancy.