Skip to content
Knowledge base

imos iX is slow: what can I check myself?

Six checks you can run yourself when imos iX is slow to open, draw or generate: from PC and graphics card to network and database.

Short answer: Start at the workstation: enough memory, the right graphics card and heavy display effects switched off. Then draw at a lower visualisation level and test whether the delay sits in the PC, the network or the database. In practice the cause is often opening drawing files over the network, or a database that is running full.

Information

Applies to

  • imos iX CAD; tested in practice in iX 2019, iX 2023 and iX 2025
  • Modules: iX CAD (drawing and views), CAM iX (CNC generation)
  • Integrations: Microsoft SQL Server (including the Express edition), order files on a network drive
  • Last reviewed: October 2026
Video

Speed test: imos iX 2021 versus iX 2019

A practical speed comparison between two imos iX versions (video in Dutch).

Speed test: imos iX 2021 versus iX 2019

1. Check the PC

  1. Open the Windows system information and note the processor, memory and graphics card.
  2. Make sure the PC has at least 16 GB of RAM. On the workstations we review, we now recommend 32 GB.
  3. Check that the PC has a dedicated graphics card with its own video memory (in practice 8 GB or more).
  4. Check that Windows still receives updates. A PC that no longer gets updates is a risk for imos iX as well.
Tip

Compare with a colleague first. If imos iX is slow on just one workstation, the problem almost always lies in that PC or its settings, not in the server.

2. Get the graphics settings right

  1. In the imos iX CAD graphics settings, assign the correct (dedicated) graphics card.
  2. In the same graphics settings, clear the Advanced Material Effects check boxes.
  3. In Windows, go to Settings > Display > Graphics and force High performance for imos iX, if the option is available.
  4. Turn off the ViewCube animation so that switching views is instant.

3. Draw at a lower visualisation level

  1. While drawing, select a low visualisation level (visu level) in the Visu manager; we recommend level 3.
  2. Only switch to a higher level, such as level 6, when you need to check details.
  3. Return to the low level once you have finished checking.

4. Find out where the delay is

  1. Pick one representative order and time how long it takes to open in your current setup (database and drawing on the server).
  2. Copy the order files (DWG and FXF) to the local drive and open the order again against the same database.
  3. Compare the times. If opening is much faster locally, the delay lies in transferring drawing files over the network.
  4. Discuss the result with your IT administrator: network connection, server storage (for example SSDs) and the location of the order folder.
Tip

In one of our speed tests, the same drawing took roughly 50 to 55 seconds to open from the server and roughly 13 to 15 seconds locally, regardless of whether the database was local or on the server. The location of the drawing files made the difference.

5. Keep the database lean

  1. Ask your IT administrator to check the size of the imos database in Microsoft SQL Server.
  2. If you run SQL Server Express, keep the 10 GB database size limit in mind and monitor growth.
  3. Delete old CAM data; you can regenerate it whenever you need it.
  4. Archive old orders, for example in a separate archive database.
  5. If the database keeps growing, consider a paid edition of Microsoft SQL Server.

6. Speed up CNC generation

  1. Set the number of processor cores CAM iX may use for generating.
  2. Base that setting on the slowest PC in your environment so it stays stable everywhere.

Why this approach?

imos iX runs on a CAD kernel and works constantly with the SQL database and the order files. Slowness therefore rarely has a single cause. Working from the workstation out to the network and the database lets you rule causes out one by one instead of guessing.

Display effects and a high visualisation level take a lot of computing power, and you do not need them while drawing. We often find these settings switched back on after a fresh installation or update. Generating views will always take some time: the more detail a view shows, the longer imos takes. That is not a fault but a trade-off between detail and speed.

Frequently asked questions

How much memory do I need for imos iX?

At least 16 GB. For workstations that handle large orders, views and CNC generation every day, we recommend 32 GB.

How can I tell whether the network is the cause?

Open the same order once from the server and once with the drawing files stored locally. If the local version opens much faster, the delay is in transferring the files.

Why does generating views take so long?

imos calculates every view from the 3D model. The more detail you show, the more calculation is needed. Faster hardware helps, but the same level of detail will always take time.

When is SQL Server Express too small?

When your database approaches 10 GB. Clean up old CAM data and orders, or move to a paid edition of Microsoft SQL Server.

Further reading

More than one solution

Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.

imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.

Download access

Sign in to check whether this download is available.