Skip to content
Knowledge base

What PC do I need for imos iX?

Processor, memory, SSD and graphics card: the guideline specs we use in practice for a responsive imos iX workstation.

Short answer: imos iX depends mainly on per-core processor speed: at least 3.5 GHz base clock, and 4 GHz or more when buying new. Pair that with at least 16 GB of RAM (32 GB preferred), a fast SSD and a DirectX 12 graphics card with 8 GB of memory that is certified by Autodesk. Run Windows 11.

Information

Applies to

  • imos iX 2023 and imos iX 2025 (we apply the same guidelines to earlier versions)
  • imos iX CAD (AutoCAD-based) and CAM iX for CNC output
  • Design workstations; for the SQL server, follow imos's own requirements
  • Last reviewed: October 2026
Video

Choosing the ideal PC or laptop for imos iX

What to look for in processor, memory, SSD and graphics card for imos iX (video in Dutch).

Choosing the ideal PC or laptop for imos iX

Guideline specs for an imos iX workstation

These are our field guidelines, not hard limits. The full official requirements are on the imos support site.

ComponentMinimumRecommended
Processor3.5 GHz base clock4 GHz or higher, strong single-core performance
Memory16 GB32 GB or more
StorageSSD, at least 10 GB freeFast SSD (around 5000 MB/s or higher)
Graphics cardDirectX 11, 4 GB, 106 GB/s memory bandwidthDirectX 12, 8 GB or more, Autodesk-certified
Operating systemWindows 11Windows 11 (we advise against Windows 10)

How to check an existing PC

  1. Use Windows system information to note the processor model, installed memory and Windows version.
  2. Look up the processor in the PassMark single-thread ranking and compare its score with a current processor.
  3. Look at the base clock, not the turbo speed. On processors with performance and efficiency cores, the base clock of the performance cores is what counts.
  4. Check that at least 16 GB of memory is installed.
  5. Look up the graphics card in Autodesk's certified hardware list and note its video memory.
  6. Check the SSD read and write speed. Older SATA SSDs reach around 500–600 MB/s; modern NVMe SSDs reach 5000–7000 MB/s.
  7. Record the results for every PC in a single overview, showing what meets the guideline and what needs attention.
Tip

We run this quick analysis on every workstation during an installation. A per-PC overview shows straight away where a memory upgrade is enough and where replacement makes more sense. Include backup, security and the Windows version in it as well.

Settings that make the PC feel faster

Good hardware only performs when imos iX is configured to use it. After installation, check the following:

  1. In the graphics settings, assign the correct graphics card and set the options correctly.
  2. Switch off the Advanced Material Effects options.
  3. In Windows, force the graphics card to High performance if the PC has more than one graphics processor.
  4. Turn off the ViewCube animation so view changes are instant.
  5. Draw at a lower visualisation level using the Visu-manager, for example drawing at level 3 and checking at level 6.
  6. In CAM iX, set the number of threads based on the slowest PC on the network. Round down and test.

Why this approach?

imos iX runs on AutoCAD. Many everyday actions, such as placing articles, recalculating a drawing and generating views, rely largely on a single processor core. A CPU with many cores but low per-core speed therefore feels slower than you'd expect. Turbo speeds only last for short bursts; the base clock determines how responsive the system stays during longer sessions.

Memory fills up on large jobs with many articles and machining operations, and below 16 GB you notice it immediately. The graphics card determines how smoothly you orbit, zoom and work in realistic view. An Autodesk-certified card has been tested with AutoCAD, which reduces display issues.

In practice, we often see PCs that meet the specs on paper but still feel slow because of their settings: too high a visualisation level while drawing, material effects switched on, or the integrated graphics chip being used instead of the dedicated card. Always check both hardware and settings.

Frequently asked questions

Is a gaming graphics card suitable for imos iX?

Often, yes. In our analyses, modern cards with 8 GB or more of video memory usually perform well. A certified card does give more certainty, because Autodesk has tested it with AutoCAD.

Is 16 GB of memory enough?

It's the minimum. For large kitchens, interior projects with many articles or rendering work, we recommend 32 GB. Existing PCs can often be upgraded cheaply.

Where can I find the official system requirements?

On the imos support site, which also lists server requirements and supported Windows and SQL Server versions.

Do these requirements also apply to the server?

No. These guidelines cover design workstations. For the SQL server, follow imos's requirements. With SQL Server Express, keep the 10 GB maximum database size in mind.

Further reading

More than one solution

Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.

imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.

Download access

Sign in to check whether this download is available.