Skip to content
Knowledge base

How do I place and renumber position numbers in imos iX?

imos iX numbers cabinets automatically. After deleting and adding cabinets the sequence breaks: type # in the Pos.nr field to renumber.

Short answer: imos iX gives every cabinet a position number automatically when you place it. If the sequence no longer runs in order, for example after deleting and re-adding cabinets, select the cabinets, type # in the Pos.nr field and press Enter: imos renumbers them in sequence. Then save the order again and regenerate the CNC and cutting files.

Information

Applies to

  • imos iX CAD, as documented in our project reports with imos iX 2019 and imos iX 2021
  • Functions: position number per article, the Aanzichten en Lay-out (Views and Layout) tab with view descriptions, Document Manager
  • Integrations: labels, cutting list (for example Ardis) and ERP
  • Last reviewed: October 2026
Video

How do I create view descriptions in imos iX?

View descriptions such as position numbers and cabinet information in your views (video in Dutch).

How do I create view descriptions in imos iX?

Checking position numbers

imos already places a position number on every cabinet by default. There is nothing to switch on; the job is to check that the sequence still makes sense.

  1. Place your cabinets in the drawing as usual.
  2. In the imos manager, click the globe icon to see the overview of the whole drawing.
  3. Check that the position numbers are unique and run without gaps.

Renumbering position numbers

If you delete cabinet 3 and then add a new cabinet, imos simply keeps counting. The sequence no longer runs neatly. To put it right:

  1. Select the first cabinet you want to renumber.
  2. Hold Shift and select the other cabinets. To renumber everything, select all cabinets.
  3. In the Pos.nr field, type the # character.
  4. Press Enter. imos now renumbers the selected cabinets in sequence, starting from 1.
  5. If you are asked to update the view, confirm it so the new numbers also appear in the drawing.
  6. Save the order again.
  7. Regenerate the CNC programs and the cutting list.
Tip

You can renumber just part of the drawing by selecting only those cabinets. Our reports also note that you can add characters to influence the numbering. Try the notation you want in a test order before using it on live jobs.

Showing position numbers in the drawing

Position numbers only pay off when everyone can see them: on the main drawing, on the label and in the shop documents. To add them to a view:

  1. Open the Aanzichten en Lay-out (Views and Layout) tab.
  2. Create a 2D plan view first.
  3. Then create a (front) elevation.
  4. Choose Aanzicht beschrijvingen (view descriptions).
  5. Pick a description principle that shows only the position numbers and click Toepassen (Apply).
  6. Select the front elevation.

You will see that length parts such as plinths get their own position as well. The numbers in the view match the imos data exactly. In practice we create a dedicated description principle for this, for example Position_numbers_only, so the draughtsman needs only one click.

Passing position numbers to production

The position number should not stay on the drawing; it has to travel with the panel into the workshop. In the projects we set up, we use it in three places:

  • Part label: next to the barcode, material and dimensions, the label shows the position number of the cabinet the panel belongs to.
  • Cutting list: the position number is sent as a separate field to the optimisation software, for example Ardis. You set this up in the cutting list configuration.
  • Documents per position: through the Document Manager you can generate a report per position, such as an exploded view with panel numbers. These reports only work properly when the position numbers are correct.

Creating sections for drawings per layout

Besides position numbers, imos also uses sections. A section is a group of one or more positions that you put together yourself. It can be a single cabinet, a complete layout or wall, but also a set of length parts such as plinths, cornices, light rails or handle profiles. The position numbers stay as they are; the section simply adds a grouping on top.

  1. Go to the iXplorer.
  2. Select the positions that belong together.
  3. Right-click the selection.
  4. Choose Maak sectie (create section).
  5. Save the order.
  6. Generate the drawings through Uitgave (output) and then Document Manager.

The Document Manager creates its dimensioned drawings per section, so the way you build your sections determines which drawings you get. A report that shows a complete layout dimensions that layout as a whole, not each cabinet automatically. If you also need cabinet drawings, create a section per cabinet or add a report per position. For setting up the dimensions in those drawings, see Semi-automatic dimensioning in imos iX.

Why this approach?

In the workshop a panel often carries nothing but a barcode, which makes it hard to see where it belongs. An average cabinet has only one left side and one right side. With the position number on the label, the shop floor knows immediately which cabinet a panel belongs to, so sorting and assembly go faster.

That only works if the numbering is unique and logical. imos keeps counting when you delete and add cabinets. Technically that is fine, but a sequence like 1, 2, 4, 7 confuses people on the shop floor. That is why we renumber just before release, never after. The drawing, labels, cutting list and documents then always match.

A position number is not the same as a section. In imos a position is one cabinet or one length part. A section is a group of positions that you create yourself, for example for drawings per layout. Your ERP or cutting software may also have its own 'section'. Keep these concepts apart on labels and lists.

Frequently asked questions

Can I number cabinets and length parts separately?

Not automatically. imos numbers cabinets and length parts such as plinths in the same sequence. You can overwrite a position number manually with any text you like, but you have to do that per article.

Why does imos skip numbers after I delete a cabinet?

imos keeps counting for every new cabinet and does not refill numbers that become free. Select the cabinets, type # in the Pos.nr field and press Enter to restore a running sequence.

Does the position number appear on labels and cutting lists automatically?

Only if the field is included in your label and cutting list configuration. Check it once with a test order; after that it is passed on with every release.

Is a position number the same as a section number?

No. A position number belongs to one cabinet or length part. A section is a group of one or more positions that you create in the iXplorer with Maak sectie (create section), for example a complete wall or a set of plinths. The Document Manager creates its drawings per section. Note that your ERP or cutting software may use 'section' for something else, such as part of an order. Agree which number goes on the label.

Can I put plinths or cornices in a section of their own?

Yes. A section can also consist of length parts such as plinths, cornices, light rails or handle profiles. Select them in the iXplorer, right-click and choose Maak sectie (create section). The Document Manager then creates a separate drawing for them.

Further reading

Want to learn imos iX CAD at your own pace? Wood Intelligence Plus includes a Dutch-language e-learning course for iX CAD.

More than one solution

Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.

imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.

Download access

Sign in to check whether this download is available.