How do I dimension imos iX views (semi-)automatically?
Dimension in the views and layout tab, worktops included, or let the Document Manager create dimensioned drawings per section automatically.
Short answer: imos iX gives you two ways to dimension. In the views and layout tab (Aanzicht en Lay-out in Dutch) you switch on automatic dimensioning when you generate the views. That is also where you dimension worktops; this no longer needs the Document Manager. If you want the same fully dimensioned drawing for every cabinet or layout, use the Document Manager: it dimensions per section and can create the drawings as soon as you save the order. In both cases, set the scale and an annotative dimension style from your template beforehand.
Applies to
- imos iX CAD. This workflow has been used in practice with imos iX 2019 and later. The result of automatic dimensioning varies between versions.
- Modules: imos iX CAD (AutoCAD-based), views and layout tab, Document Manager
- Last reviewed: October 2026
Preparation: scale and dimension style
- Check that your template contains an annotative dimension style, for example with dots and one decimal place.
- Choose the scale you need (for example 1:20) before running automatic dimensioning.
- Set AutoCAD's
ANNOAUTOSCALEto 4 if you work with several scales. Dimensions are then added per scale and print at the same text height.
Automatic dimensioning while generating views
- Save the order.
- Choose the views and layout tab (Aanzicht en Lay-out in Dutch).
- Choose the plan view (Bovenaanzicht).
- Switch on automatic dimensioning in the view dialog.
- Select all cabinets and, if you use one, the room.
- Check the dimensions in the plan view.
- Repeat the steps with the elevation (Aanzicht) for the front view.
- Dimension worktops in the same tab with the worktop dimensioning option (Werkblad maatvoeren in Dutch).
Always start with the plan view. It fixes the cabinet positions and depths. The elevation adds heights and widths. In this order you get the fewest duplicate dimensions.
Adding dimensions
- Select the view where a dimension is missing.
- Right-click and choose the add dimensioning option (Maatvoering toevoegen in Dutch).
- Place the dimension.
- For single dimensions, use AutoCAD dimensioning with the same dimension style.
- Check a section with the semi-automatic section dimensioning.
Making manual dimensions follow changes
- Type
DIMASSOCon the command line. - Set the value to
2(associative). - Check the setting in an existing drawing by refreshing a view.
If associative dimensioning is off, manual dimensions stay where they were, with their old values, after a view is refreshed. So check the setting when dimensions do not follow.
Dimensioning with the Document Manager
The Document Manager does not dimension the whole order at once, but per section. A section is a group of one or more (cabinet) positions that you combine in the iXplorer. So a section can be a single cabinet or a complete wall. Length parts such as plinths, cornices, light rails and handle profiles can also be dimensioned as a section.
- In the iXplorer, select the positions that should form one drawing.
- Right-click and choose the create section option (Maak sectie in Dutch).
- Repeat this for every layout, single cabinet or group of length parts you want dimensioned.
- Generate the drawings via Output (Uitgave), Document Manager. You get a dimensioned drawing per section as a PDF and a DWG.
- Check the first drawings and add a dimension in the DWG if needed.
Cabinet-level layouts with a fixed scale
With the Document Manager you can create different layouts at cabinet level. Conditions, usually based on the cabinet dimensions, then automatically pick the layout with the ideal scale. Each layout has a fixed scale in the drawing format. A narrow base cabinet ends up at a different scale than a tall cabinet or a complete wall, but the dimensioning always looks consistent and correct.
Creating drawings when you save
Once the Document Manager is set up, you can have it generate the drawings while you save the order. There is nothing else to start. That saves anywhere from a few minutes to hours of work per drawing.
Get help with the setup. Setting up custom Document Manager templates generally takes a fair amount of work: sections, layouts, conditions and scales all have to fit together. After that, the Document Manager is extremely fast. Wood Intelligence is happy to help you set up these templates. Read more about consultancy or get in touch.
Why this approach?
Automatic dimensioning is fast and always matches the model, but it is not smart. imos dimensions what it sees. Cabinets of different heights produce extra dimension lines, and taps, sinks and other installation items get dimensioned too. We often see draughtspeople switch to doing everything by hand because of this. That's a waste. Semi-automatic works best: let imos lay down the basics, then add what you need.
You set the scale and dimension style beforehand because an annotative style scales text and dots with the viewport. Every drawing then looks the same. Identical settings for every user mean Document Manager reports also look the same for everyone.
Common mistakes
- Setting the scale afterwards. Text and dots end up the wrong size. Choose the scale before running automatic dimensioning.
- Starting with the elevation. You get more duplicate and illogical dimensions. Start with the plan view.
- Installation items dimensioned. Save taps, pipework and similar items as installation articles so they are left out.
- Associative dimensioning off. Manual dimensions do not follow a changed view.
- Different settings per user. If the dimensioning settings in the imos options differ between users, Document Manager reports look different for each draughtsperson.
Frequently asked questions
Why does imos add duplicate height dimensions?
They are usually not real duplicates. They come from height differences between cabinets or parts, and imos dimensions every difference. Delete the ones you don't need or adjust the view setup.
Can the plan view show only walls, worktop and island dimensions?
Not with automatic dimensioning alone. Let imos place the basics, delete what you don't need and add the missing dimensions manually.
Do I always need to dimension fronts?
Not necessarily. View annotations can show front heights and grain direction automatically as text or symbols in the view. That saves a lot of dimension lines.
Can I dimension worktops automatically?
Yes. Nowadays you dimension worktops directly in the views and layout tab (Aanzicht en Lay-out) with the worktop dimensioning option (Werkblad maatvoeren). This no longer needs a Document Manager report.
What is a section in imos iX?
A section is a group of one or more positions that you want to draw and dimension together, for example one cabinet, a complete wall or the plinths of a kitchen. You create a section in the iXplorer: select the positions, right-click and choose the create section option (Maak sectie). The Document Manager creates one drawing per section.
Can the Document Manager create drawings automatically when I save?
Yes. Once the layouts and sections are set up, the Document Manager can generate the drawings while you save the order. The dimensioned drawings are then ready as soon as the order is saved.
Further reading
- Automatic views and sections in imos iX
- Setting up a drawing template and title block in imos iX
- Placing and renumbering position numbers in imos iX
- imos training
Want to learn imos iX CAD at your own pace? Wood Intelligence Plus includes a Dutch-language e-learning course for iX CAD.
More than one solution
Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.
imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.