Skip to content
Knowledge base

How do I generate cutting lists from imos iX for my optimisation software?

Match material and edge band names exactly, save the order under a unique name and generate CNC files and cutting list in one run for Ardis, Schnitt or other software.

Short answer: first make sure material and edge band names in imos match the names in your optimisation software exactly. Then save the order under a unique name and, when saving, switch on both CNC program generation and the cutting list. imos writes the cutting file to the import folder, and you read it into Ardis, Schnitt or similar software to optimise.

Information

Applies to

  • imos iX CAD with CAM iX; based on integrations we set up between imos iX 2019 and imos iX 2023
  • Functions: cutting list output on save, cutting list configuration (cfg), materials and edge banding, split joints
  • Integrations: optimisation software such as Ardis (STK) and Schnitt (PTX), optionally via ERP
  • Last reviewed: October 2026

Preparation: matching names

A cutting list is only as good as the names in it. Your optimisation software only recognises a board or band when the name matches exactly.

  1. Look up the exact material name in your optimisation software's material library, for example BRTR-PERS-18-KL1.
  2. Open the matching material in imos.
  3. Enter that name verbatim in the field that feeds the cutting list. In our Schnitt integrations that is Beschrijving 1 (Description 1).
  4. Do the same for every edge band.
  5. Make sure the band name also distinguishes band height.
  6. Check the maximum board thickness per band: if the edgebander's scraper needs 3 mm, a 23 mm band fits boards up to 20 mm.
Tip

Ideally imos, the optimisation software and your ERP system all use the same codes. Agree one naming structure, for example supplier, board type, thickness, colour code and texture. Then nobody has to translate by hand.

Splitting overlong parts

If a plinth or worktop is drawn longer than your board, imos may warn you. Split the part first with the split joint function:

  1. Choose Selecteer paneel (Select panel) from the right-click menu.
  2. Click the panel you want to split.
  3. Pick a split joint principle. For straight panels, edge to edge usually works best.
  4. Click the edge of the panel that counts as the front.
  5. Choose a division formula, for example 1:1 for two equal parts or 1000mm:1 for 1000 mm plus the remainder.

Generating the cutting list

  1. Save the order with a unique order name, for example 24001_01A: year, project number, drawing number and revision letter.
  2. Fill in the Opdracht gegevens (order data). They are passed on to your saw software.
  3. When saving, switch on both CNC program generation and the cutting list.
  4. Start CNC generation in the pop-up.
  5. If errors appear, fix them before you continue.
  6. Without errors, imos then creates the cutting list automatically. Confirm overwriting an existing list if asked.
  7. The file is now in your optimisation software's import folder, for example I:\CuttingLists.

Importing into the optimisation software

Import differs per package. Two examples from practice:

  • Schnitt: choose the parts lists, then import and the IMOS PTX format. Select the file, optionally choose optimisation parameters and click Ok. If a material or band is missing, Schnitt tells you; you can create it or ignore the warning.
  • Ardis: imos writes an STK file based on a configuration file (cfg). It defines what goes into each field, such as material, sizes, quantity, grain, edges, barcodes and comments. Some companies also use an Excel material list from the Uitgave (Output) tab, Rapporten (Reports).

With other software the question is the same: which fields does the saw expect? A practical checklist: name, length, width, quantity, material, grain, order number, cabinet position, comment, edges 1 to 4, CNC programs 1 and 2, and a code to keep fronts together.

Passing comments

  1. Select the panel in the drawing; you will see the puzzle-piece icon.
  2. Enter the text in the comment field mapped in your cutting list configuration, for example Opmerking 1 (Comment 1).
  3. Press Enter.
  4. Generate the cutting list; the comment now appears in the mapped column.

To give one comment to a whole group of panels, make an element group selection first and then enter the comment.

Edge codes and flipped panels

Edge codes look simple but often go wrong on panels that are flipped for the CNC. By default imos flips panels to the right, so a left side is turned over to put the inside face up. In that case edges 2 and 4 must be swapped in the cutting list, or the edge sequence on the label no longer matches.

In an Ardis configuration we solve this by reading per panel whether the first program is turned, for example:

IFEQUAL[ID;PXM_PROGRAM_INFO_VALID[ID;1;is turned;ncnum];TEXT[no];PRFID2;PRFID4;%s;%s]

We also let the edges rotate with the panel's grain direction. In the saw software, switch off automatic swapping of length and width so the X dimension stays the X dimension; the edge code depends on it.

Keeping fronts together

For continuous grain you can keep fronts together. Schnitt uses templates for this; in imos we reserve a separate field for it. An alternative inside imos is a nesting panel:

  1. In the Visu manager, switch on Lengtedeel zaagplan tonen (show length part cutting plan).
  2. Switch article mode off so you select panels.
  3. In the iXplorer, choose the spanner icon.
  4. Choose Nestpaneel genereren (generate nesting panel).
  5. Select the fronts that must stay together and accept the settings.

Note: the fronts themselves also remain in the cutting list.

Why this approach?

The cutting list is where the drawing meets the workshop. Every manual step in between, such as retyping names or chasing comments, costs time and causes errors. That is why we map names properly once and let imos do the rest.

We generate CNC and cutting list in one run because the barcodes come from CNC generation. A unique order name is needed because barcode scanners only accept unique program names. And we fix errors first, because a cutting list built on faulty CNC programs only moves the problem to the shop floor.

We keep this article software-neutral on purpose. Whether you use Ardis, Schnitt or another package, the principles are the same; only the file format and field names differ.

Tip

One name, the same everywhere. Most cutting list problems arise because names in imos and in the cutting software differ slightly. In the Wood Intelligence Plus library you put together materials and edge banding once, with your own code, ERP code, thickness and board size, and import them straight into imos iX. Use the same code in your optimisation software, and imos, saw and ERP line up.

Frequently asked questions

Which optimisation software can imos iX feed?

In practice we connect imos to Ardis and Schnitt, among others, and to other saw software via an ERP system. The principle is always the same: imos writes a file according to a configuration, and the optimisation software reads it in.

Why are the barcodes in my cutting list empty?

Barcodes are only filled when you also generate the CNC programs in the same run. Switch on both options when saving and generate again.

My saw software can't find a material. What now?

Compare the name in the mapped field of the imos material with the name in your saw software's material library. They must match exactly, including spaces and capitals.

Why are the edge codes wrong on a left side panel?

The panel was most likely flipped for the CNC. Edges 2 and 4 then need to be swapped in the cutting list. You handle that in the cutting list configuration by reading whether the panel is turned.

Further reading

More than one solution

Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.

imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.

Download access

Sign in to check whether this download is available.