Skip to content
Knowledge base

How do I carry grain direction and rotated grain correctly through to the cutting list and CNC in imos iX?

Wood grain on in the material, direction driven by variables and one agreed grain code in the cutting list: that is how grain reaches production correctly.

Short answer: Tick the wood grain check box for every textured material and set up the material with the grain along the length of the board. Rotate the grain per panel or group of panels with a grain variable (0 = along, 90 = across), not with extra materials. Then agree one grain code with your cutting software and use a test order to check that length and grain direction match in the cutting list.

Information

Applies to

  • imos iX CAD and CAM iX; applied in iX 2017 up to and including iX 2023
  • Areas: material master data, variables and value sets, cutting list configuration, production workflow
  • Integrations: cutting and optimisation software (for example Ardis or Schnitt) and MES/ERP such as Proteus
  • Last reviewed: October 2026

Step 1: Set up the material correctly

  1. Open the material in the master data.
  2. Tick the wood grain check box for every board with a wood texture. Without it, rotating the grain has no effect.
  3. Set up the material as if the grain were standard: grain direction and board length run the same way.

Step 2: Control grain direction with variables

  1. In the Variables, add a grain variable next to each material variable, for example NERF_PLINTEN (plinth grain) next to MAT_PLINTEN.
  2. Use 0 for grain along the panel length (default) and 90 for grain across.
  3. Turn it into a value set with the options Along (0) and Across (90), so the designer picks from a drop-down.
  4. Create separate grain variables for fronts and visible panels, and for length parts such as plinths, light rails and cornices.
  5. Link derived variables to one base variable, for example the grain of the side panels to the grain of the carcass material. One choice then drives every carcass part.
  6. Fill in the value per order, or per cabinet via the article-specific variables.
Tip

Only one panel deviates? Use panel alignment in 3D, where you can set the grain direction of that single panel. Use the variable as soon as a whole group (all fronts in one colour, for example) needs to rotate.

Step 3: Check in 3D and in the imos Manager

  1. Make the 3D machinings visible.
  2. Look at the square grain icon on the panel: the = sign points in the grain direction.
  3. Open the imos Manager and compare the panel's length and width. With a rotated grain, the drawing dimensions and cutting dimensions are exactly swapped.

Step 4: Pass the grain on to the cutting list and CNC

  1. Agree with your cutting software supplier which grain code you export, for example 0 = no grain, 1 = length, 2 = width.
  2. Choose the matching grain function in the cutting list configuration. In the Ardis export, ARDISGRAIN returns 0, 1 or 2. ARDISGRAINNEW returns 0 or 1 and swaps length and width.
  3. Make sure the length in the cutting list is always the grain direction. Some MES systems, such as Proteus, require this.
  4. Does the list reach the saw through an MES (for example from imos via Proteus to Schnitt)? Align the settings in the MES and in the imos.ini together.
  5. Test with a small order: one panel along, one panel across and one plinth. Check the cutting list, label and CNC program.

Why this approach?

In interior joinery, grain direction is not a detail. A front with the grain the wrong way is a reject. The error usually creeps in between drawing, cutting list and cutting software.

A grain variable lets you keep one material per decor. Extra materials for each direction clutter the database and need a separate mapping in your cutting software. With the variable, the designer chooses once, for the whole order or per cabinet.

We regularly see carcasses and fronts come out right while plinths, cornices and light rails end up wrong in the cutting list. Those are length parts with their own material and grain variables, so always include them in your test.

Tip

Materials from Wood Intelligence Plus. In the Wood Intelligence Plus library you put together your materials and edge banding from the decors of Egger, Pfleiderer, Unilin and others, with your own codes and board sizes, and import them straight into imos iX. Because every material follows the same structure and naming, you can check the grain setting of all your wood decors in one go, as described in step 1.

Frequently asked questions

Do I need a new material for cross grain?

Usually not. A grain variable (0 or 90) rotates the grain without an extra material. A separate material with its own order number only makes sense when you actually buy a different board, such as a cross-veneered one.

How can I see which way the grain runs in imos iX?

Make the 3D machinings visible and look for the square grain icon with the = sign. Also check in the imos Manager that length and width are correct.

Can I set the grain differently for one cabinet than for the rest of the order?

Yes. Enter the grain variable in that cabinet's article-specific variables. For a single panel, use panel alignment in 3D.

Which grain code does my cutting software expect?

That depends on the package and its settings. A common convention is 0 = no grain, 1 = length, 2 = width. Agree on it with your supplier and test with one panel along and one across.

Further reading

More than one solution

Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.

imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.

Download access

Sign in to check whether this download is available.