Skip to content
Knowledge base

How do I set up a logical naming system for materials, edge banding and surfaces in imos iX?

A fixed structure of supplier, type, thickness, colour and texture makes materials, edge banding and surfaces in imos iX easy to find and link.

Short answer: Give every material a fixed structure: supplier, board type, thickness, colour code and texture, separated by underscores, for example EGG_SPA_18,3_W980_ST02. Record every abbreviation in one list and only create new materials, edge bands and surfaces from that list. Names stay predictable, and your ERP, imos iX and cutting software can share the same codes.

Information

Applies to

  • imos iX CAD; applied in iX 2019 up to and including iX 2025
  • Areas: master data for materials, edge banding (profiles), surfaces and render principles
  • Integrations: ERP system and cutting or optimisation software (for example Ardis or Schnitt)
  • Last reviewed: October 2026
Video

How do I create a material (automatically) in imos iX?

Creating materials manually or automatically in imos iX (video in Dutch).

How do I create a material (automatically) in imos iX?

Step 1: Define one list of abbreviations

  1. Create one central list (a spreadsheet, for example) of every abbreviation used in the database.
  2. Give each supplier a three-character code, such as EGG for Egger, PFL for Pfleiderer and OST for Ostermann.
  3. Give each material type a three-character code, such as SPA for chipboard, MDF for MDF and ABS for ABS edging.
  4. Also define the letters for material groups, for example C carcass, F front, Z visible panel, W worktop and R back panel.
  5. Agree who may add new codes. One administrator keeps the list clean.

Step 2: Name board materials

  1. Use the order SUPPLIER_TYPE_THICKNESS_COLOUR_TEXTURE.
  2. Write the thickness with at least two digits plus the decimal, for example 18,3 or 08,0.
  3. Use the supplier's colour code (four characters, such as W980) and texture code (such as ST02).
  4. Avoid spaces, mixed upper and lower case and special characters such as +, # or /.
  5. Put the readable description (such as the collection name) in the description field, not in the name.
Tip

Always create a new material by copying an existing, correctly configured one. That way thickness, formatting class, grain direction and render principle carry over correctly in one go.

Step 3: Name edge banding

  1. Use the same logic: edge type, colour code and texture, for example ABS_W980_ST7.
  2. Add the dimension as a fixed last part where needed, so 1 mm and 2 mm edging can be told apart.
  3. Fill in the profile material field consistently for every ABS edge. Machining principles in CAM iX can use it as a condition.
  4. In the panel definitions, record the edge sequence with one digit per edge: 0 no finish, 1 thin finish (such as tape), 2 edge banding. A code such as 2002 then shows at a glance which edges get banding and which stay unfinished.

Step 4: Name surfaces and render images

  1. Give HPL and veneer surfaces the same structure as board materials, so they sit side by side in lists.
  2. Save the matching image as a .jpg with exactly the same code, for example EGG_H1388_ST40.jpg, in the IVIS folder of your library.
  3. Use an image of the full board (at least 1024 pixels) with the wood grain running horizontally.
  4. Link the image in the Render principles and link that render principle to the material, edge band or surface.
  5. For a board with a grain, tick the wood grain check box.

The abbreviations of the Wood Intelligence Plus database

You don’t have to invent such a list of abbreviations from scratch. The Wood Intelligence Plus library is built entirely on fixed abbreviations and a structured way of working. All abbreviations are documented in one large abbreviation table, covering articles and construction panels as well as materials, suppliers, connectors and CAM machining. A few examples (the codes are based on Dutch terms):

PartAbbreviationsMeaning
ArticlesOK, BK, KKBase cabinet, wall cabinet, tall (column) cabinet
Construction panelsBD, DK, CS, VS, RGBottom, top, fixed shelf, adjustable shelf, back panel
MaterialsSPA, MDF, MUL, HPLChipboard, MDF, plywood, HPL
SuppliersEGG, PFL, OST, HETEgger, Pfleiderer, Ostermann, Hettich
ConnectorsDVL, CLA, GRPDowel, Clamex, handle
PropertiesOL, TL, DGOverlay, inset, continuous
CAMBR, FR, ZG, GRDrilling, milling, sawing, groove

Because every name is made of the same building blocks, you can read a name like a sentence. A material name, for example, starts with the supplier, followed by the board type, the thickness and the colour code.

Benefits of this structure

  • Instantly recognisable. A designer can tell from the name what a part is, without opening it.
  • Quick to search and sort. Parts with the same abbreviation sit together in the iXplorer and in lists.
  • One language across the chain. The same codes appear in cutting lists, CNC programs and the link with your ERP.
  • Grows without clutter. New materials and articles follow the existing pattern, even when a colleague creates them.
  • A faster start. You build on a proven structure instead of designing your own system.
Tip

Get advice before you build your database. Changing a naming convention afterwards takes a lot of work, because orders, cutting lists and integrations refer to the old names. Wood Intelligence has extensive experience in setting up imos databases and guides and manages that process for your company. Together we decide which abbreviations and structure fit your workflow, whether you build on Wood Intelligence Plus and how to make the switch without disrupting production. Read more about consultancy or book a meeting.

Why this approach?

A material name in imos iX is more than a label. It shows up in cutting lists, CNC programs, labels and the import into your ERP. When the ERP, imos and the cutting software use the same codes, nobody has to retype or translate anything.

A fixed structure also makes bulk changes possible. Because the board type always sits in the same position in the name, you can, for example, assign a formatting class to all MDF materials in one go, or add a list of materials with a script. We regularly see databases without agreements become cluttered: the same board appears three times, spelled three ways. Searching takes longer and cutting list errors follow.

Why a comma in the thickness? The imos.ini can list a full stop as an illegal character (ILLEGAL_CHARACTERS), and other software sometimes reads a full stop as a separator. A comma keeps the name readable and safe.

Frequently asked questions

Do I have to rename all existing materials?

Not necessarily. Many companies apply the new naming to new materials, or when cleaning up into a new database. Only rename existing materials if you understand the impact on old orders and integrations.

Where does the thickness go in the name?

Third, after supplier and type. That way materials of the same type sort neatly by thickness.

How do I name boards I laminate myself with HPL or veneer?

Use the core board as the material and record the laminate as the top and bottom surface. Give that surface the same code structure.

Can I leave out the supplier code?

You can, but the same colour code exists at different suppliers. The supplier code prevents confusion.

Can I use the Wood Intelligence Plus abbreviations for my own materials and articles?

Yes, that is exactly what they are for. If you work with the Wood Intelligence Plus library, your own materials and articles should follow the same structure. We help you extend the list with abbreviations specific to your company.

Further reading

More than one solution

Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.

imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.

Download access

Sign in to check whether this download is available.