Skip to content
Knowledge base

Choosing dowels, FixChip or Clamex per cabinet in imos iX

With variable connection situations you switch the connection of all construction panels at once, per panel type or even per side.

Short answer: give every construction panel a variable connection situation instead of a fixed connector. You then choose in the variables, in one go, whether a cabinet is built with dowels, FixChip or Lamello Clamex P. At sub level you make an exception per panel type, and even left and right can differ.

In Wood Intelligence implementations we often see that a company wants a different connection for on-site assembly than in the workshop. With variable connection situations, that is a choice in the order, not a new cabinet.

Information

Applies to

  • imos iX CAD, libraries with variable connection situations such as Wood Intelligence Plus
  • Functions: order variables, Kies_Element_Verbinders (choose element connectors), Scan verbinders (scan connectors)
  • Connectors: dowels, dowels with screws, cam fittings, FixChip, Lamello Clamex P, Lamello Tenso
  • Integrations: CAM iX and the CNC programs follow the chosen connector
  • Last reviewed: November 2026

What is a connection situation?

A connection situation is where two panels meet, for example the top and the left side. Instead of placing a fixed dowel there, the situation refers to a variable. That variable decides which connector is used. The abbreviations follow the Dutch panel type, such as BD for bottom, DK for top, CS for fixed shelf and MZ for centre side.

Step 1: choose the connection for all panels

  1. Open the order variables.
  2. Expand the group Kies_Element_Verbinders.
  3. At main level, choose the connection, for example Deuvels (dowels), Deuvels en Schroeven (dowels and screws), FixChip or Lamello Clamex_P.
  4. Refresh the cabinets.
At main level you choose the connection for all construction panels.

Step 2: check with Scan verbinders

  1. Select the cabinet.
  2. Choose Scan verbinders.
  3. On the left, click the connection, for example Clamex P.
  4. On the right, check which variant was chosen, such as LA_Clamex_P_10_10 or LA_Clamex_P_14_14. The 3D preview shows where the connectors are.
Check in Scan verbinders which connector was actually placed.

Step 3: a different connection per panel type

Sometimes you want to join the top differently from the bottom. Expand Kies_Element_Verbinders and choose a separate value in the group for that panel type. In the example below, the bottom (BD_Verbindersituatie) and fixed shelf (CS_Verbindersituatie) get Clamex P, and the top (DK_Verbindersituatie) gets dowels with screws.

A different connection per panel type, here the top with dowels and screws.

Step 4: let left and right differ

A typical case is a blind side. Everything is screwed so the carcases are easy to assemble, but on the visible side you do not want a screw head.

  1. Expand the group of the panel type, for example BD_Verbindersituatie.
  2. Leave BD_Verbindersituatie_Links (left) on dowel with screw.
  3. For BD_Verbindersituatie_Rechts (right), choose Dowel only.
  4. Refresh the cabinet and check the result in Scan verbinders.
Dowel and screw on the left, dowel only on the right for a blind side.

Why this approach?

The construction method changes more often than the cabinet. A project for on-site assembly asks for detachable Clamex joints, a nesting project for FixChip, a standard cabinet for dowels. With fixed connectors you would have to build and maintain a separate cabinet for every variant. With variable connection situations there is one cabinet, and the connection is the answer to a question.

Do agree up front which connection is the default. Discuss it with the cabinetmakers: where do the dowels go, how is the top fixed, what must be detachable? Involving them raises the chance that the new way of working actually lands in the workshop.

Tip

Ready to use in Wood Intelligence Plus. In the Wood Intelligence database, all construction panels have variable connection situations with dowels, screws, FixChip and Lamello Clamex P. Read more about Wood Intelligence Plus.

Frequently asked questions

How do I switch all dowels to FixChip at once in imos iX?

In the order variables, set Kies_Element_Verbinders to FixChip and refresh the cabinets. This only works if the panels have variable connection situations.

Can the top get a different connection than the bottom?

Yes. Under Kies_Element_Verbinders, choose a different value for DK_Verbindersituatie than for BD_Verbindersituatie.

How do I make a blind side without screws?

Expand the connection situation of the panel type and choose a dowel only on that side, for example Dowel for _Rechts (right).

Further reading

More than one solution

Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.

imos is a trademark of imos AG. Lamello, Clamex and Tenso are trademarks of Lamello AG. Wood Intelligence is an independent consultancy.

Download access

Sign in to check whether this download is available.