How do I control cabinet heights, plinth height and front gaps centrally with variables in imos iX?
Define cabinet height, plinth height and front gaps as order variables, reference them in your cabinets and change a whole order in one go.
Short answer: Create fixed variables for cabinet height, plinth height and front gaps, for example $OK_HOOGTE (base cabinet height), $H_PLINT, $FV_BOVEN and $FV_ONDER (top and bottom front gap), and make your concept cabinets reference them in the Article Designer. For each order, you enter the values once in the order variables. Exceptions for a single cabinet go through the variable list or the Article Specific Variables.
Applies to
- imos iX CAD; applied in iX 2021 and later versions
- Areas: variables and value sets in the database, Article Designer, variable list, article category and front gap principle
- Integrations: none; it does affect the cutting list and CNC output
- Last reviewed: October 2026
Step 1: Define the central variables
- List the dimensions found in almost every order: cabinet heights, plinth height and the top, bottom and between-drawer front gaps.
- Create one variable per dimension with a clear name, for example
$OK_HOOGTE,$H_PLINT,$FV_BOVENand$FV_ONDER. - Also define helper values you need in formulas, such as the front material thickness and the distance from front to carcass.
- Create a value set (drop-down menu) for recurring choices: open the database, go to Variables, select the group, expand the value sets and duplicate a similar value set via the hamburger menu.
- Give the variables that must be filled in for every new order the category Standard. You can then filter the list on it.
Step 2: Make the cabinets reference the variables
- Open a concept cabinet in the Article Designer.
- Replace the fixed height with the variable, for example
$OK_HOOGTEfor all base cabinets. - Keep width and depth fixed. You set those in the drawing by stretching the article.
- Let drawer divisions calculate from the height and gap variables, so fronts stay equal when the cabinet height changes.
- Put long formulas behind a calculation variable of their own, for example
$VERD_OK_3LAfor three equal drawers, in a separate group for calculated values. - Save the cabinet and test it in a new drawing with two different heights.
A formula for equal drawer fronts subtracts the top gap, the bottom gap and the gaps in between from the cabinet height, then divides the rest by the number of drawers. Designers only pick the calculation variable; nobody edits the calculation group.
Step 3: Plinth, end panels and per-cabinet exceptions
- Link plinth and worktop to the cabinets through the Article Category. imos then draws the length parts automatically after placement.
- For end panels and filler panels, set the extra length downwards to
$H_PLINTand the front projection to front thickness plus gap. They then use the same snap points as the carcasses. - Use a different article category when the plinth must stop against the panel instead of running underneath it.
- Attach a variable list to the concept cabinets with the height and the left and right front gaps. It asks for these values during insertion; if a field stays empty, the order value applies.
- To change one cabinet later, select it in article mode and open the Article Specific Variables.
A negative front gap creates an overhang. With -18 a front runs over an 18 mm end panel, and with, say, -50 at the bottom a front extends 50 mm downwards. That way you draw extended fronts without a separate cabinet.
Step 4: Working order per job
- Save the order with the order details.
- Open the order variables and first choose the cabinet concept, for example handleless or with handles.
- In the Order value column, enter the cabinet heights, plinth height and front gaps, using the value sets where possible.
- Draw with the concept cabinets and do not overwrite them.
- Place end cabinets through the variable list, so the front gap on the open side is right straight away.
- If the height changes later, only change the order value and refresh the cabinets.
Why this approach?
With fixed dimensions in every cabinet, a different worktop height or plinth means opening every cabinet separately. With one variable you change all base cabinets at once, and they stay identical. That saves drawing time and avoids odd sizes in the cutting list.
We recommend making only the height variable. Width and depth are set in the drawing by stretching the article; a variable width or depth breaks that. A rule of thumb works well in practice: around 80% of cabinet settings should be selectable through a value set. Review ten recent projects to see which choices recur.
The order sets the standard; only the cabinet that differs gets its own value.
Common mistakes
- Typos in formulas. One wrong variable name or bracket and the cabinet calculates the wrong size. Test every formula with two heights.
- Making width and depth variable too. Stretching articles then stops working.
- Overwriting concept cabinets. Save a modified cabinet under a new name, or the basis for every following order changes.
- Reopening old orders in a cleaned-up database. Opening them adds the old variables back. Archive old orders separately.
Start from a variable foundation. The Wood Intelligence database from Wood Intelligence Plus is fully variable. Cabinet height, plinth, front gaps, setback and connectors are set centrally, and for each cabinet concept there is an example cabinet that shows the smartest way to build it. You then only set up your own construction principle, instead of building and testing every formula yourself. Read how this fits into a project in Planning an imos iX implementation, or read more about Wood Intelligence Plus.
Frequently asked questions
What is the difference between order variables and article specific variables?
Order variables apply to the whole order. Article specific variables override that value for one cabinet. Always start from the order and only deviate per cabinet where it is really needed.
Can wall cabinets and tall cabinets have their own height?
Yes. Create a height variable per cabinet type and split the concept cabinets into separate folders, for example base, tall and wall cabinets. Each type then references its own variable.
Do the plinth legs follow the plinth height?
They do when the base in the cabinet references the plinth height variable. Fill in the variable before placing the cabinet; then add the front plinth through the length parts, which only works when the article category is set.
Where do I set how front gaps behave per cabinet type?
In the front gap principle linked to the cabinet through its article category. You can see which principle a cabinet uses in that cabinet's article specific variables.
Further reading
- Plinth, base and cornice not following in imos iX
- Handles, handle profiles and handleless in imos iX
- Plan an imos iX implementation
- imos iX consultancy
More than one solution
Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.
imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.