What is FixChip and how do I use it with imos iX on a nesting machine?
FixChip is a wood connector machined in the same nesting run as the panels. How it works in imos iX CAD/CAM and how to set up the machine.

Short answer: FixChip is an HDF connector that is machined in the same nesting run as the panels themselves. No edge drilling and no second machine are needed. In imos iX, FixChip is an ordinary connector, so CAM iX creates the grooves automatically. With the Wood Intelligence Plus library, FixChip is ready to use.
Applies to
- imos iX CAD and CAM iX, from imos iX 2019 up to recent versions
- Machines: CNC nesting and portal machines with a tool changer
- Connectors: FixChip and FixChip Mini by FixChip B.V.; tooling: Leitz Diamaster routers
- Wood Intelligence Plus: FixChip import (download after login, with a licence)
- Last checked: October 2026
Installing iX+ FixChip in imos iX
Step by step: installing the Wood Intelligence Plus FixChip import in imos iX (video in Dutch).
What is FixChip?
FixChip is a small connector made of High-Density Fibreboard (HDF). You mill a matching groove into both panels; the FixChip drops in and pulls the panels tightly together. Two routers are needed: a shank router for the vertical groove and a T-slot router for the lateral groove. Both work from above, in the same clamping as cutting out the panel.
Besides the connector, FixChip B.V. supplies FixChip Mini, FixChip Glue, FixChip Screw and starter kits. Leitz supplies the matching Diamaster routers (6 mm and 35 mm). Current product information and the assembly manual are available at fixchip.com.
Why is it ideal for a nesting machine?
- Everything in one run. A nesting machine works the sheet from above. Classic dowels need holes in the edge, so a second operation on a drilling machine or a horizontal drilling unit. FixChip grooves are milled during nesting, without reclamping the panel.
- Fewer handling steps. Panels go straight from the nesting table to the edgebander and assembly. No extra machine, no extra stack of work in progress.
- Accurate. The grooves use the same zero points as the contour, so the joint is always in the same place relative to the edge.
- Fast assembly. The connector centres the panels; cabinets are square straight away.
- Sustainable material. The connector is made of HDF, a wood-fibre product.
Installing FixChip in imos iX
- Make a backup of your imos iX database.
- Preferably install the import in a test database first.
- Download the FixChip import from the Wood Intelligence Plus portal (after login, with an active licence).
- Unzip the file. It contains the folders
DB,IMORDERandSYS. - Import the contents as shown in the video above.
- Choose FixChip as the connector for your cabinet. In the Wood Intelligence database you switch per project between FixChip, dowels and screws using a variable.
- Draw a test cabinet and check in the 3D view that the connectors are in the right places.
Setting up the nesting machine
- Load the Diamaster shank router (6 mm) and the Diamaster T-slot router (35 mm) into the tool changer.
- Register the tools in the machine's tool database, with diameter, cutting length and direction.
- In CAM iX, link the FixChip operations to these tools through the machining principles.
- Check that the postprocessor writes the T-slot as a separate operation at the correct depth.
- Run the FixChip grooves before cutting out the contour, so small parts are still held down.
- Mill a test corner in your most-used board thickness and assemble it according to the FixChip manual.
- Adjust the groove depth if needed until the joint closes tightly without play.
Watch out in the first production runs
- Board thickness varies by supplier. An 18 mm board is often slightly thicker or thinner in practice. Check the groove depth for every new material.
- Keep the connectors dry. HDF absorbs moisture and then swells. Keep the bucket closed.
- Machining order. If the machine cuts the contour first, a small part can shift before the groove is made.
- Tool names. Give the routers a recognisable name, see naming tools, so nobody uses them for something else by mistake.
Why this way?
With a nesting machine, the gain is in the number of handling steps after the machine. Every extra drilling operation means stacking, loading and checking again. Because FixChip is a connector in imos iX, imos calculates the position automatically for every cabinet size. CAM iX creates the grooves, and the machine mills them along with the contour. When the cabinet changes, the connectors move with it.
Need help with the setup? Wood Intelligence has installed FixChip for customers several times, in imos iX and on the nesting machine. We help with the import, linking the tools in CAM iX, the postprocessor and the first test corners. Contact us or see Wood Intelligence Plus.
Frequently asked questions
Does FixChip work on every nesting machine?
According to FixChip, the connector works on all nesting machines and with all software. The machine must be able to change between the shank and T-slot router, and the postprocessor must write the T-slot correctly. Always mill a test corner first.
Can I combine FixChip with dowels or screws?
Yes. In the Wood Intelligence database you choose per project, using a variable, which connector to use. That way you can use FixChip for nesting and dowels for an order that is drilled on another machine.
Where do I buy FixChips and the routers?
The connectors, glue and starter kits are sold by FixChip. The Diamaster routers are made by Leitz and are also available through FixChip.
Do I need Wood Intelligence Plus to use FixChip in imos iX?
No, you can build the connector and the operations yourself. Wood Intelligence Plus gives you a tested import that matches the Wood Intelligence database, so you can start right away.
Further reading
- What is a postprocessor and how do I set up a CNC machine in imos CAM iX?
- Machining principles and formatting classes in CAM iX
- Working with a test database alongside production
- Wood Intelligence Plus
More than one solution
Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.
imos is a trademark of imos AG. FixChip is a trademark of FixChip B.V. Diamaster is a trademark of Leitz. Wood Intelligence is an independent consultancy.