How do I choose order and drawing numbers for unique CNC programs in imos iX?
One fixed structure of order number, drawing number and revision makes every CNC program and barcode unique, so the machine never loads the wrong program.
Short answer: Take the order number from your ERP or quotation system and add a drawing number and a revision letter, for example ORDER_2024_001_01A. CNC program names are derived from the order name. A unique order name therefore gives unique programs and barcodes; a free-text name such as Kitchen family X does not.
Applies to
- imos iX CAD with CAM iX; applied in iX 2019 up to and including iX 2025
- Areas: order name and order data, CNC generation, barcodes in the cutting list
- Integrations: ERP or quotation system, optimisation software, CNC machines with a barcode scanner
- Last reviewed: October 2026
Step 1: Fix the naming structure
- Use the order number from your ERP or quotation system as the first part. It is already unique.
- Add a drawing number for each part of the order, for example
01for the kitchen and02for the wardrobe. - End with a revision letter:
A,B,C. - Use fixed lengths with leading zeros (
0001rather than1), so names and programs sort correctly. - Separate the parts with an underscore and avoid spaces.
Step 2: Apply it consistently in imos
- Save every new order under the agreed name.
- Fill in the order data completely, so customer and project appear on the drawing and label instead of in the order name.
- Drawing changed after release? Save the order with the next revision letter instead of overwriting the old name.
Warning: never reuse an order name. The program names then match those of an earlier order. Files in the machine folder get overwritten, or the scanner loads the program from the wrong order.
In practice a program name consists of order number, drawing number, panel number and a sequence number per program. A second operation then automatically gets its own name and barcode.
Why this approach?
A barcode scanner at the CNC looks up the program by name, so two identical names mean a risk of running the wrong program. The ERP order number is already unique and links order, drawing and cutting list. The revision letter ensures an old and a new version never share a name.
Common mistakes
- Customer name as order name. The same customer comes back, and the name already exists.
- Reusing the old name after a change. Two versions with the same program names are then in circulation.
- Every designer using their own structure. Uniqueness is then no longer guaranteed.
Frequently asked questions
What if we don't have an ERP?
Use a running number from your quotation or project administration. The only condition is that it is never issued twice.
Where does the customer name go?
In the order data. You can show it on the drawing title block and on panel labels without it affecting the program name.
Further reading
- Barcodes and QR codes on panels from imos iX
- Connect imos iX to your ERP with one article code
- Generate cutting lists from imos iX
More than one solution
Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.
imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.