How do I put barcodes and QR codes on panels and labels from imos iX?
The barcode on a panel label is the CNC program name from CAM iX. Use unique names, map them in the cutting list and create QR codes where the machine needs them.
Short answer: in practice, the barcode on a panel label is the name of the CNC program CAM iX creates for that panel. Save the order under a unique name, generate CNC programs and cutting list in one run, and map the program names to the barcode fields in your cutting list configuration. The label itself is usually printed by the saw or optimisation software; where needed, we create QR codes as an image per program.
Applies to
- imos iX CAD with CAM iX; based on integrations we set up between imos iX 2019 and imos iX 2025
- Functions: CNC generation in CAM iX, cutting list configuration (cfg), panel production information
- Integrations: optimisation software such as Ardis or Schnitt/CutRite, CNC machines with a barcode scanner
- Last reviewed: October 2026
Step 1: make program names unique
A barcode scanner at the CNC looks up a program by name, and the program name is derived from the order name. Duplicate names mean the machine may load the wrong program.
- Agree one naming convention, for example
24001_01A: a unique number from your ERP or quotation system, an underscore, a drawing number and a revision letter. - Save every order using that convention.
- For a revision, move to the next letter (A, B, C) rather than reusing the old name.
- Check whether the scanner software searches a single folder only or subfolders too. That decides whether all programs must go into one folder.
Step 2: getting barcodes into the cutting list
- Select the articles and generate the CNC programs with CAM iX.
- Fix every error from the generation first.
- When saving, switch on both CNC generation and the cutting list so they are created in the same run.
- In the cutting list configuration, map each barcode column to the program name of program 1 and program 2, per machine. In an Ardis configuration that looks like
PXM_PROGRAM_INFO_VALID[ID;1;ncnum;ncnum;CNC_1]andPXM_PROGRAM_INFO_VALID[ID;2;ncnum;ncnum;CNC_1]. - Import the cutting list and check that the barcode columns are filled.
Note: if you generate only the cutting list, the barcode fields stay empty. Program names only exist once CNC generation has run. After renumbering or any change, generate CNC and cutting list again.
Running two machines, say a drilling and a nesting machine? Give each its own column so the operator scans the right barcode. Panels with a second operation get a second barcode.
Step 3: setting up the label
The saw or optimisation software usually prints the label from the cutting list data. Typical content:
- dimensions, material and top/bottom surface;
- edge codes on all sides;
- position number, customer and panel description;
- comment, barcode 1 and barcode 2;
- panel image and logo.
- Fill in the production information in your panel definitions, for example Left side. This text ends up on the label.
- Map each label field to a column in the cutting list configuration.
- Check with a test panel that the edge codes match how the panel lies. On flipped panels, edges 2 and 4 must be swapped.
On composite parts we add a reference to the parent panel, so the workshop sees where each part belongs.
Step 4: QR codes where the machine needs them
Some machines prefer a QR code that also carries a path or stop. We solve this with a small script alongside imos:
- The script reads the CAM data per panel from the imos database: order name, program name, folder, machine and stop.
- For each program it creates an image: a 1D barcode (we use Code 128) or a QR code.
- The image is named after the program, so the label can pick it up by name.
- You build the content from fixed parts, for example path, program name, file extension and stop. When an order changes, the images are updated.
Note: many machine controls expect a fixed terminator after the barcode, such as %. Without it the scanner reads the code, but the machine doesn't open the program. Test one label at the machine before printing a whole order.
Why this approach?
The barcode is the bridge between label and machine. With the CNC program name as barcode, nobody retypes anything: the operator scans and the machine loads the right program. That is why unique names come first.
imos supplies the data and the saw prints the label, since it handles the panel first. In recent versions we prefer to configure barcode settings inside imos rather than in imos.ini, so they live in the database and are the same on every workstation.
Panels without machining get no CNC program and no barcode. If such a panel still needs a fixed orientation or edge sequence, we create an empty program with only the panel image and suppress its barcode in the cutting list configuration.
Common mistakes
- Reusing order names. Two orders with the same name give duplicate program names and therefore duplicate barcodes.
- Generating only the cutting list. Without CNC generation the barcode fields stay empty.
- Forgetting the terminator. The scanner reads the code but the machine does not open the program.
- Not swapping edge codes on flipped panels. The label then doesn't match how the panel lies.
- Leaving production information empty. The label then shows a technical name instead of Left side.
Frequently asked questions
Can imos iX print labels itself?
Most companies we work with print labels from the saw or optimisation software. imos supplies the data via the cutting list.
Why do some panels have no barcode on the label?
Panels without machining get no CNC program and so no program name. Also check that you generated CNC programs and cutting list in the same run.
When should I use a QR code instead of a regular barcode?
When the machine needs more than the program name, such as a path or stop. Check first what your machine software can read.
How do I get unique barcodes if our order names aren't unique?
Change the naming convention, for example unique number, drawing number and revision letter. Program names, and therefore barcodes, then become unique automatically.
Further reading
- Generating cutting lists from imos iX
- Edge codes wrong after flipping
- What is a postprocessor? Setting up a CNC machine in CAM iX
- Consultancy
More than one solution
Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.
imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.