Skip to content
Knowledge base

How do I draw a room with niches, sockets and switches in imos iX?

Draw the room with its niche on the Room tab and place sockets and switches at exact positions as installation objects, ready for the electrician.

Short answer: first draw the room on the Ruimte (Room) tab: start with a rectangular room, or build the room from a closed polyline that already includes the niche. Then place sockets and switches as installation objects: pick the wall, type D in the command line and enter the distance from the floor and from the corner. A separate view without cabinets gives you the installation drawing for the electrician.

Information

Applies to

  • imos iX CAD; workflow from our training material (imos iX 2017 and 2019) and recent project reports
  • Functions: Ruimte (Room) tab, Visu-manager, installation objects, Aanzicht en Lay-out (Views and Layout) tab
  • Prerequisite: installation objects exist in your database as installation articles
  • Last reviewed: October 2026

Drawing a room with a niche

  1. Open the Ruimte (Room) tab and click the CAD icon. The palette with room functions appears.
  2. For a rectangular room, choose Maak nieuwe ruimte (Create new room).
  3. For a niche, first draw the floor plan as a closed polyline with the niche included, then choose Maak ruimte van polylijn (Create room from polyline). Use Hoek invoegen (Insert corner) for small changes.
  4. Select the walls and adjust height, length and colour in the Eigenschappen (Properties) window. You can select several walls at once.
  5. Place doors and windows from the Deuren (Doors) section of the same palette.
Tip

Don't want a skirting along the room walls? Set that value to 0. Add a sloping ceiling with Dak-Element (Roof element) and use Wand aan dak aanpassen (Fit wall to roof) to connect the wall to it.

Placing sockets and switches

  1. Set the Visu-manager to a level with the installation objects checkbox ticked.
  2. Pick an object from the Installatie (Installation) folder.
  3. Move to the wall where the object should go, but do not click yet.
  4. Type D in the command line.
  5. Choose the bottom arrow and enter the distance from the floor.
  6. Choose the left or right arrow and enter the distance from the corner of the wall.

Creating the installation drawing

  1. Create a new view on the Aanzicht en Lay-out (Views and Layout) tab.
  2. Select everything, but deselect the cabinets.

Why this approach?

An electrician wants dimensions from the floor and the wall corner, not from a cabinet that may still move. Linking installation objects to the room keeps those dimensions correct. Making the niche part of the floor plan also keeps the walls properly connected.

Frequently asked questions

Where do the installation objects come from?

They are articles with a linked DWG, marked as installation articles in the element manager. Not every database has them; if they are missing, they need to be created first.

Do I show a 2D symbol or the 3D object?

Either works. In the view descriptions for installation articles you can link a DWG as an AutoCAD block. In practice some companies deliberately show only the 3D objects.

Further reading

More than one solution

Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.

imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.

Download access

Sign in to check whether this download is available.