How do I create a sink or built-in appliance with a cut-out in imos iX?
Copy an existing sink or appliance article, link a clean 3D DWG with an AUSSCHNITT contour and make it selectable through a value set.
Short answer: in imos iX you create a sink or built-in appliance by copying an existing article and linking a new, simple 3D DWG to it. For a sink, a single closed polyline on the AUSSCHNITT layer defines the cut-out in the worktop. A value set then lets the draughtsman pick it from a drop-down list in the sink unit or appliance housing.
Applies to
- imos iX CAD; based on projects from imos iX 2019 up to recent versions. Folder names and variables may differ per version and database.
- Functions: Artikel Catalogus (article catalogue), Artikel Designer (Article Designer), Database Manager (variables and value sets) and article-specific variables
- Items: inset, flush-mounted and undermount sinks, ovens, microwaves, fridges and other appliances in an appliance zone
- Integrations: CAM iX, views and order lists
- Last reviewed: October 2026
Preparation: the sink's 3D DWG
- Always start from the empty start drawing (
0.dwg) with only layer 0 and theAUSSCHNITTlayer. - Download the worktop cut-out DXF or DWG from the manufacturer. That contour must be exact.
- Redraw the cut-out as one closed polyline on the
AUSSCHNITTlayer, with as few line and arc segments as possible. - Build a simple 3D model from solids: walls, bottom, rim and the radii that define the look.
- Place the model on a logical origin, usually the centre of the bowl at 0,0,0. Check the rim height in side view.
- Give the model a colour, run
PURGEand save with a logical name, for exampleSPB_SUPPLIER_SERIES_COLOUR. - Put the DWG in the
PurchDWGfolder of the shared imos library, directly in the main folder.
One cut-out per drawing. A DWG may contain only one AUSSCHNITT contour. Rim rebate, through cut-out and trap recess each get their own drawing. For undermount sinks the contour always runs from the top down; to mill from below, rotate the contour in 3D.
Creating the sink article and the cut-out
- Find an existing sink in the Artikel Catalogus that resembles the new one and place it in an empty drawing.
- Open the article in the Artikel Designer via Artikel wijzigen (modify article).
- Save it straight away as a new article with a new name.
- Change the path to the new DWG in the article.
- Place the article again, check the cut-out, save and generate its image.
- If your library uses separate cut-out articles (in our set-ups recognisable by
_SP_in the name), repeat the steps with a drawing that holds only the cut-out. Its insertion point must match the sink's.
Making it selectable with a value set
- Open the Database Manager and choose Variabelen (variables).
- Go to the variable group for the sink type, for example
Type_Spoelbak. - Expand the value sets and duplicate a similar one via the hamburger menu.
- Replace the article names with those of the new sink and cut-out.
- In the sink unit, select the new sink, tap and any soap dispenser in the variables.
- Always test the result in a new drawing.
Test in a new drawing. Once a DWG is in a drawing as a block, imos no longer overwrites that block. Test in a new drawing and use PURGE.
Creating a built-in appliance
- Collect a JPG of the appliance front (not WebP) and the technical dimension drawing.
- Draw a simplified 3D model: a front part and a rear part are enough. The insertion point is 0,0,0 at the centre of the appliance.
- Map the JPG onto the front through
MATERIALS. For a glass door, clear glass lets you see inside the appliance. - Save the DWG in the
PurchDWGfolder with a logical name. - Open an existing oven article in the Artikel Designer, replace the DWG reference and save it as a new appliance.
- Link the article in the variables of the appliance housing: the article to the appliance variable and the niche height to the height variable (in our libraries, for example,
APP1_ARTandAPP1_HOOGTE). - For recurring appliances, create a value set that sets appliance and zone height in one go.
Selecting the appliance in the drawing
- Place a cabinet with an appliance zone.
- Open the article-specific variables.
- Choose the appliance's value set, for example an oven with a 560 mm niche height.
- Click Toepassen (Apply).
Why this approach?
In imos a sink or appliance is more than a picture. The article drives the worktop cut-out, the zone height in the cabinet and the line on the order list. Copying keeps those settings.
The AUSSCHNITT contour comes straight from the manufacturer, so the cut-out is right in the worktop, in the views and in CAM iX, where it is milled as an inner contour: through for the bowl, to depth for a recessed rim.
In practice we often see overly heavy 3D models converted from other software; they slow down every drawing. A value set means the draughtsman picks from tested combinations.
Common mistakes
- An open or overly complex contour. The cut-out must be one closed polyline.
- Wrong origin. If the model is off the agreed origin, the sink sits skewed or too high in the worktop.
- Overwriting the original. Save as a new article first, then change the DWG.
- DWG saved locally or in a subfolder. Other workstations then see nothing. Use the shared library, for example
\\SRV-FILE\imos\Library\PurchDWG.
Frequently asked questions
How does the cut-out reach the CNC?
CAM iX treats the cut-out as an inner contour: through for the bowl itself, not through for a recessed rim. If you get a message that no machining principle was found, a principle for that contour or tool is missing.
Do I need a 3D model for every appliance?
No. The zone height in the variables is enough to build the cabinet correctly. A 3D model mainly helps presentation.
How do I stop taps and sinks from being dimensioned in views?
Mark such items in the article as an installation object or purchased part and filter on that in the view conditions, for example Installatieobject = NEE (installation object = no) and Koopdeel = NEE (purchased part = no).
Further reading
- Creating handles, locks and hardware in the imos iX database
- Machining principles and formatting classes in CAM iX
- Automatic views and sections in imos iX
- imos training
More than one solution
Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.
imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.