How do I create new handles, locks or hardware in the imos iX database?
Copy an existing connector set that resembles the new hardware, adapt the connector, work group and 3D DWG, then test it in an empty drawing.
Short answer: in imos iX you don't build new hardware from scratch; you copy an existing connector set that resembles it as closely as possible. Rename the set and the connector, adapt the work group to the supplier's drilling pattern and link a 3D DWG and an image. Then test the hardware through Scan verbinders (connector scan) in an empty drawing.
Applies to
- imos iX CAD; based on training sessions and library set-ups from imos iX 2017 up to recent versions. Screen layouts may differ slightly between versions.
- Functions: Scan verbinders (connector scan), connector sets, connectors, work groups, connection situations, variables and value sets
- Hardware: handles and knobs, locks with strike plates, hinges and other connector hardware
- Integrations: CAM iX (drillings and milling from the work group), hardware list and costing
- Last reviewed: October 2026
Preparation: collect the data
- Download the 3D model as a DWG from the supplier, at a low level of detail if it still looks good.
- Open the DWG, check the absolute origin and remove extras such as a logo.
- Save the DWG in the
ConnDWGfolder of the imos library, using the article number as the file name. - Place a product image in
Info\BITMAPSin the same library. - Look up the drilling pattern or milling dimensions from the supplier.
Creating a handle or knob
- Open a new, empty drawing and place a cabinet with a door.
- Select the cabinet and choose Scan verbinders.
- Pick the handle closest to the new one: a knob for a knob, a handle with the same hole spacing for a handle.
- Click the red browse button to go to the database.
- Save the copy of the connector set under a new name.
- Open the linked connector and give it a new name too.
- Fill in the commercial data: article number, order number, description, supplier, colour and, if needed, price.
- Link the new DWG and the image from
Info\BITMAPS. - Open the work group and check the drillings and hole spacing, or the length, width and depth for a pocket milling.
- Click Toepassen (Apply) and save the connector set.
- Refresh the cabinet, select the new handle in Scan verbinders and check the orientation of the 3D model.
3D model rotated the wrong way? Suppliers often use a different base rotation from imos. Correct the rotation in the connector's drawing values, not in the work group. Otherwise the drillings rotate too.
Adapting the work group
The work group creates the drillings or milling for CAM iX. Again, copy one that already looks similar.
- Check the element number. The door is always element 0.
- Read from the supplier's drilling pattern which holes are needed and where they sit relative to the centre.
- Adjust insertion points and diameters per hole, or add a line with the plus button.
- Save the work group under a new name if the drilling pattern differs.
- If the connector needs no machining, use the empty work group
CONN_NULL.
Creating a lock with strike plate
In imos a lock is a connector set, usually with two connectors: the lock in the door and the strike plate in the side, top or bottom panel.
- Copy an existing lock connector set that is closest to the new lock.
- For each connector, adapt the data, DWG and work group as described above, and check that the drilling comes from the inside of the door.
- Check that the connection situation has the right connector type, so Scan verbinders offers the lock.
- Store type and position per door type in variables: for example a text filter for the lock type and values for vertical and horizontal offset.
- Create a value set so the draughtsman picks the lock from a drop-down list.
- Test the lock on upper, middle and lower doors.
Watch out when combining handle and lock: locks often reference the inside of the carcase, while handles reference the front size. Depending on the door overlay, handle and lock will then be offset. Include the overlay on the lock side in your calculation, or check it per door type.
Why this approach?
A connector set holds far more than a 3D picture: connector scan parameters, CNC machining, order and price data. Copying keeps all those working settings, so you only change what differs.
A logical folder structure matters just as much. A handle belongs with the handles, a lock with the locks. Only then can the connector scan suggest suitable hardware. Give work groups a fixed naming convention too, for example per hole spacing.
For locks we choose handle, lock or both at the top level, and set type and position per door type.
Common mistakes
- Overwriting the original. Forget to rename both set and connector, and you change the existing hardware everywhere.
- Testing in a live order. Always test new hardware in an empty drawing; you see straight away what goes wrong.
- Rotating in the work group. Correct the 3D model's orientation in the drawing values, not in the work group.
- DWG saved locally only. Other workstations then show no 3D model. Use the shared library, for example
\SRV-FILE\imos\Library.
Working with Wood Intelligence Plus? Then you don't need to create most hardware yourself. The Wood Intelligence database already contains commonly used connectors such as Fixchip, dowels and screws, lift systems (for example Blum AVENTOS HK top) and the Blum LEGRABOX, MOVENTO and MERIVOBOX drawer systems, in all colours and variants. You only need to create hardware that is specific to your company. Build it with the same structure and naming, so it works seamlessly alongside the library. Read more about Wood Intelligence Plus.
Frequently asked questions
Why don't I see my new hardware in the drawing?
Refresh the cabinet or use Artikel opfrissen (refresh article). Also set the Visualisatie Manager (visualisation manager) to a high level with Verbinders tonen (show connectors) switched on, or the 3D models stay hidden.
What does 'Geen selectie' (no selection) in the connector scan mean?
At least one parameter, such as door overlay or front height, doesn't match the hardware in the library. Hover over the line to see which values imos is looking for. A range such as 4->6 in the filter makes the hardware more flexible.
Why doesn't imos pick my new handle automatically?
When several handles share the same hole spacing, imos picks the one used most often. Reset that handle's usage counter to zero or select the new handle manually a few times; the software then follows your choice.
Further reading
- Handles, handle profiles and handleless fronts (Tip-On) in imos iX
- Machining principles and formatting classes in CAM iX
- Connecting imos iX to your ERP with one article code
- imos training
More than one solution
Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.
imos is a trademark of imos AG. Blum, AVENTOS, LEGRABOX, MOVENTO and MERIVOBOX are trademarks of Julius Blum GmbH. Wood Intelligence is an independent consultancy.