Skip to content
Knowledge base

What can I do with a panel's advanced settings?

Under Advanced settings you see the imos names, the corner transition, the rotation on the machine and machinings, and create an own panel with a contour or composition.

Short answer: Switch on Advanced settings in the inspector. You then see the corner transition, four tiles (Rotation and machine, Contour, Machinings, Composition) and the imos names of the panel. Viewing changes nothing; only Apply saves something. A contour or composition turns the panel into an own panel, with a name you choose yourself.

Information

Applies to

  • The cabinet editor of Wood Intelligence Plus (Cabinets → open a cabinet → Zones tab → inspector)
  • All panels with a build-up; the option Save as default only for the WI+ administrator
  • Last checked: November 2026

Step 1: open the advanced settings

  1. Click the panel in the zone tree.
  2. At the bottom of the inspector, switch on Advanced settings (on the right of the title). The choice is remembered for next time.

At the bottom you see Panel type and Panel definition: the imos names of the chosen build-up and the panel, such as CP_DK_DG_2222 and PD_DK.

Advanced settings: viewing changes nothing.

Step 2: the corner transition

Under Corner transition you choose which edge banding runs through the corner: edges 1 and 3, or edges 2 and 4. By default the panel follows your company setting. This determines the edge drawing in Wood Intelligence Plus; in imos the panel definition decides this.

Step 3: view rotation and machine

  1. Click View in the Rotation and machine tile.
  2. The panel studio shows the panel in the cabinet, lifts it out and lays it flat on the machine, with the sticker side up and the edge numbers along the sides.
  3. Does the sticker belong on the other side? Switch on Flip sticker and click Apply.

Step 4: machinings

The Machinings tile opens the list of machinings on the panel: those from the connections and the build-up, and manual machinings on this panel. Add machining adds one.

Step 5: create an own panel with a composition or contour

  1. Click Compose in the Composition tile, or Choose contour in Contour.
  2. Under Composition, choose Composite and add strips or thickenings. The preview updates straight away; nothing is saved yet.
  3. Under Result you see the name of the new panel. The suggestion is the current panel definition with _SG, for example PD_DK_SG. You may change the name.
  4. Below the name you see whether it is new or already exists, and how many other panels use it. If it exists, one click picks a free name, such as PD_DK_SG2.
  5. Click Apply and confirm with Create own panel. The panel belongs to your company; the build-up, edges and connections keep working.
You choose the name of a composite panel; existence and use are checked.

Why this way?

Most panels only need a build-up. Only a different shape or a composition needs an own panel definition, and then you want to know what it is called and where else it is used. At Wood Intelligence we saw that a fixed name per banding pattern makes the list of panel definitions grow; that is why the studio now only creates an own panel for a contour or composition, and always after you confirm.

Frequently asked questions

Does opening the panel studio create a new panel definition?

No. Viewing and trying out saves nothing. A new panel definition is only created after Apply and the confirmation Create own panel.

Where do I find the imos name of a panel?

Under Advanced settings, in the Panel type (the build-up) and Panel definition fields. Construction → Panel rules shows the imos name of every build-up.

Can I choose the name of a composite panel myself?

Yes. The suggestion is the panel definition with _SG; you may use any name that starts with PD_ and consists of capitals, digits and _.

Why is the corner transition not sent to imos?

In imos the panel definition decides which edge runs through the corner. The corner transition in Wood Intelligence Plus is meant for the edge drawing.

Further reading

More than one solution

Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.

imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.

Download access

Sign in to check whether this download is available.