How do I split production across multiple machines and work with flipped parts in CAM iX?
With production workflows and conditions, CAM iX picks the right machine for each panel. Panels machined on two sides get a second, flipped program.
Short answer: in CAM iX the production workflow decides which machines a panel passes through. With the Multi Workflow module you create a workflow per route with conditions, for example panels with a radius go to the nesting machine, and let CAM iX choose automatically. Panels with operations on both sides get a second program in which the panel is flipped 180 degrees about the Y axis.
Applies to
- imos iX 2017 and later with CAM iX; running several workflows at once is possible from imos iX 2019 with the Multi Workflow module
- Functions: production workflows, positioning criteria, machine fields
- Integrations: CNC machining centres and nesting machines, for example from Homag or Biesse
- Last reviewed: October 2026
Step 1: one workflow per route, with conditions
A workflow acts as a filter: what has already been sawn or edged is not repeated on the CNC. Every operation needs a place somewhere.
- For each machine, decide when a panel must not go there: dimensions, thickness, shape or operations only one machine can do.
- Create a workflow per route with a descriptive name, for example
BIE_NESTING_ABS_CNC02andBIE_ZAGEN_ABS_CNC01_CNC02. - Put the conditions at the top of the workflow, for example: panels with a radius go to the nesting machine only.
- Give every active workflow a priority above 0; the more specific workflow gets the highest.
-1switches a workflow off. - Set up positioning, for example edge 1 against the stop if X is larger than 350 mm and Y is no more than 1.5 × X; otherwise the longest side in X.
- When generating, choose Automatisch (automatic) and Process ALL matching workflows.
Can an operation only be done on the second machine, for example an inner contour? Add that machine on the last line of the first machine's workflow. That way the operation always has a place.
Step 2: flipped parts, operations on two sides
- Add a position line in the CNC step, for example
Bewerkingen vanaf BOT(operations from bottom). - Link the machine field for the second program.
- Rotate the panel with Y-as 180 (Y axis 180), so the bottom face is on top.
- Link positioning criteria and operation type with Link naar machine-definitie (link to machine definition).
Why this approach?
If you tick a workflow yourself, imos does not check the conditions. With conditions, imos decides per panel and reports what cannot be done. Flipping about the Y axis is exactly what the operator does.
Common mistakes
- An operation with no place. CAM iX then reports that the operation cannot be assigned to the workflow.
- Forgetting edge codes. On a flipped panel, edges 2 and 4 swap. See edge codes after flipping.
Frequently asked questions
Do I need the Multi Workflow module?
By default CAM iX works with one production workflow. If you want several workflows side by side, selected by conditions, you need the Multi Workflow module.
What goes to the nesting machine and what to the machining centre?
You define that in the conditions. Often panels with a radius or angled shape go to nesting, and rectangular carcass work goes through sawing, edge banding and CNC. For fronts you nest, set the edges to after CNC.
Further reading
- What is a postprocessor and how do I set up a CNC machine in imos CAM iX?
- Why are edge codes wrong after flipping?
- Reading the CAM iX log file
More than one solution
Almost every question in this knowledge base has more than one solution. The best fit depends on your workflow, machinery and integrations. Not sure which applies to you, or are you using software we don't (yet) support? Feel free to email Wood Intelligence. We're happy to think along with any challenge.
imos is a trademark of imos AG. Wood Intelligence is an independent consultancy.